AT PSU with -5Volt, P8 & P9 connectors

     Safety

     Connectors

P8 & P9

6 x Molex

3 x Floppy

1 x 12V P4

Note:

-This PSU has the -5Volt wire required for boards with ISA cards.

-This PSU is a modified ATX PSU suitable for AT systems.

-Some systems without motherboard do not require the use the connectors P8 & P9.

-AT PSU traditionally have a Monitor Outlet but a standard PC/Kettle power cord can be used to power the monitor directly from the main instead.

-P8 and P9 connectors MUST be connected so that the black wires are side by side (in the centre).

      Overview

  Dimensions: PSU,  140x150x85mm.
  Voltage: 110/230Volt. (Auto range)

  Applications: AT systems, Shopping mall kiosks, Gaming machines,

  Plant control systems, HDD storage enclosures etc...
  With 2 quite fans.

  Suitable replacement for: SPU-300G, Acer Aspire 5133LK, AGI BPS-2001-4U  & more...